Jerguson® Series 60™ Safety Ballcheck Valves
Jerguson No. 60 Series Valves are designed and built to the highest standards. Quality features such as stainless steel stems, seats, and ballcheck, regrindable and renewable seats. A wide selection of optional features permit a high degree of customizing to meet very specific demands.
​
No. 60 Series Valves
The series consists of the following valves:
-
No. 63 – straight pattern with female N.P.T gage connection
-
No. 64 – straight pattern with union gage connection
-
No. 66 – offset pattern with female N.P.T. gage connection
-
No. 67 – offset pattern with union gage connection
Standard Features:
Safety Shut-Off: All No. 60 Series Valves are equipped with a stainless steel ballcheck located upstream from the seat which instantaneously shuts off flow of medium being gaged in case of gage glass breakage. The ball may be omitted on request.
​
Union Gage Connection: Nos. 64 and 67 are furnished with a union gage connection which allows a top and bottom connected gage to be turned to any desired angle for convenient visibility. It makes possible removal of the gage without removing the valves – a feature which saves time when gages must be cleaned or maintained.
​
Offset Pattern: Nos. 66 and 67 valve bodies are designed so the gage and drain connections are offset 7/8″ from the centerline of the vessel connections. By removing the plug, the interior of a top and bottom connected gage glass may be swabbed without removing the gage.
​
Convertible to Quick Closing: No. 60 Series Valves may be converted from plain to quick-closing, in the field, by replacement of sleeve, stem and packing.
​
Regrindable, Renewable Seat: The seat may be reground using the sleeve as a guide. The seat may be renewed by removing the seat with a standard wrench.