Jerguson® Series 300L™ Liquid Level Gages

For Pressures up to 300# ANSI

Features

  • Recessed Gasket Seat in Chamber and Cover

  • 25mm Glass, Size 11-20

  • Economical 300# ANSI Gage

  • Tempered Borosilicate Glass

  • Wetted parts conform to NACE MR0175 & MR0103

  • All parts listed in ASTM or ASME 31.3

  • All Gages feature a continuous, one-piece chamber regardless of length

The Series 300L liquid level gage is a lower cost gage with increased visible ranges.  The basic strategy was to provide more visible range per gage section at an economical price.  This glass gage series uses the proprietary Jerguson 25mm glass, which is thinner, narrower and longer than traditional gage glass.  The Series 300L features a recessed gasket surface, bar-stock non-shrouded covers and ASTM grade bolting.  Due to the length of each gage section this model is not recommended for high pressure steam service.

TEST PRESSURE: All gages are hydrostatically tested by Jerguson prior to shipment @ 1 -1/2 times the design pressure rating at 100°F (38°C).

300L-Gage-Site_edited.png
300L tables.JPG
300L tables.JPG

Resources: