SAS-16™ Snap-Action Switch

The switch mechanism is based on a unique Jerguson tri-magnet design where the snap action is accomplished by the utilization of magnetic repulsion.  The magnet mounted in the float causes the secondary magnet to rotate as it passes up and down. The switch magnet is repelled by the secondary and snaps to the opposite side. This causes the cradle to pivot, moving the push rod which operates the switch contacts.  The result is positive snap action interlock switching – no springs…no cams…no problems.

  • Externally Mounted – No Contact with Fluid Process

  • Suitable for Applications up to 750ºF!

  • Fully Adjustable Switch Post

  • Highly Resistant to Vibration

  • SPDT (Single-Pole Double-Throw)

  • 10 Amp Rating 120 VAC; 10 Amp 240 VAC

  • Standard Anodized Aluminum Enclosure; Available in 316 Stainless Steel

  • UL/CUL Class I, Division 1, Groups A, B, C, D

  • ATEX Version Available

SAS 16.jpg
sas16_2.jpg
sas16_edited.png