NightStar® LED Illuminators

nstar mailer


NightStar Indicators for the Magnicator® make a level gage continuously visible…night or day with bright LED illumination.  No more flashlight searches, no more spending more time than needed in process areas.

NightStar Illuminators provide an array of bright LEDs to shine on standard mechanical flags indicators.  No light or low-light, the operator can easily and reliably verify level.

-High contrast indication
-Not angle dependent – view can see clearly from many positions
-Reduced operator exposure in process areas can increase safety
-LEDs have a nominal life of 10 years
-Approved for use in Class I, Division 1 classified locations


NightStar Indicator

Specification Overview

  • FM & CSA Approval to:
    • Class I, Division 1, Groups B, C, & D
    • Class II, Division 2, Groups E, F, & G
  • ATEX approved to:
    • Ex d [ia] IIC Ta
  • Power Supply: 120 or 240 VAC
  • Power Consumption:
    • < 750 mA @ 120 VAC
    • < 75 mA @ 240 VAC
  • Max. Remote Distance from Power Supply to Light Strip = 80 feet (24.3m)
  • Electrical Connection: 1/2″ FNPT
  • Ambient Temperature: -40°F (-40°C) to 170°F (77°C)
  • Process Temperature:
    • Up to 450°F (232°C)
    • 450°F (232°C) to 600°F (316°C) with OPTIONAL air purge kit on indicator
  • Protection Methods:
    • Explosion-proof power supply
    • Intrinsically-safe lighting circuit
    • NEMA 4X design



Brochure: NightStar Magnetic Level Gage Illuminator

IOM: NightStar Installation, Operation and Maintenance Manual