The Jerguson MTII 4300™ - SIL2 is now Available
We’re proud to announce the Jerguson MTII4300 now has SIL2 certification available! When installed on a Jerguson Magnicator, the MTII4300 offers excellent reliability you’ve come to expect from Jerguson.
The MTII4300 precisely senses the position of the Magnicator float by applying a short 1.5μs pulse to the sensing element. This pulse creates a magnetic field around the sensing element. When the float’s magnetic field and the sensing element’s magnetic field intersect, a twist occurs in the sensing element. Based on the time between the initial pulse and the detection of the corresponding twist, the location of the float magnet can be precisely calculated.
- 4-20 mA loop powered; 10.5 to 28 VDC
- HART 7 protocol communications standard
- SIL2 Available
- Foundation Fieldbus output optional
- Sensing lengths from 6 inches to 228 inches (15 cm to 6 meters)
- Continuous level measurement with repeatability .01% Full Scale
- FM approved for use in hazardous locations:
- Class I, Division 1 Groups B, C, D
- Class II, Division 2 Groups E, F, G
- CSA and ATEX approvals optional
- NEMA 4X Enclosure Standard – 316SS optional
Resources
Approvals: USA FM MTII4200 and MTII4300
Brochures: MTII4300 Magnetostrictive Transmitter
continues to be the global leader in the level indication and control, sightflow indication, and filtration and separation industries. Clark-Reliance is fully committed and dedicated to providing the lowest “cost-of-ownership”, innovative products and solutions.Copyright © 2021 Clark-Reliance Corporation. All Rights Reserved.