Jerguson® Series 51™ Gages – High Pressure Gage for up to 10,000 PSI @ 100⁰F

series 51

Features:

•Tempered Borosilicate Glass conforming to BS3463, JIS B8211, & DIN 7081
•Available Transparent Only
•Ported Gage with O-Ring Seals
•All Gages feature a continuous, one-piece chamber regardless of length
The Jerguson Series 51 Liquid Level Gage is a specially designed instrument capable of withstanding high pressures.  The one-piece chamber is machined out of solid bar stock carbon steel or stainless steel as specified.  It is drilled lengthwise and crosswise at each port leaving tie-bars in between to resist deflection under pressure.  Viton® “O” rings that seal each port are unaffected by most liquids that cause deterioration in rubber.  The “O” rings are seated in recessed circular channels to assure proper seating action.

Ratings:

•Carbon steel and 316SS are rated for 10,000 PSI @ 400°F using Viton®

•Gages with 304SS chambers are rated for 6600 PSI @ 400°F using Viton®

•1/2″ NPT or Flanged to 6600 PSI @ 400°F (High pressure fittings recommended for higher pressures)

Resources:

Brochure: Series 51 Gage Brochure

Drawing: Series 51 End-Connect, 1/2 Inch NPT

IOM: Series 51 Installation, Operation and Maintenance Instruction Manual

Minimum Centers Guide: Resource book for determining minimum center-to-center dimension for gage and valve assemblies