Jerguson® Series 300L™ – For Pressures up to 300# ANSI

 series 300L

 Features:

•Recessed Gasket Seat in Chamber and Cover
•25mm Glass, Size 11-20
•Economical 300# ANSI Gage
•Tempered Borosilicate Glass
•Wetted parts conform to NACE MR0175 & MR0103
•All parts listed in ASTM or ASME 31.3
•All Gages feature a continuous, one-piece chamber regardless of length
The Series 300L gage is a lower cost gage with increased visible ranges.  The basic strategy was to provide more visible range per gage section at an economical price.  This gage series uses the proprietary Jerguson 25mm glass, which is thinner, narrower and longer than traditional gage glass.  The Series 300L features a recessed gasket surface, bar-stock non-shrouded covers and ASTM grade bolting.  Due to the length of each gage section this model is not recommended for high pressure steam service.
 
TEST PRESSURE: All gages are hydrostatically tested by Jerguson prior to shipment @ 1 -1/2 times the design pressure rating at 100°F (38°C).

Resources:

Brochure: Series 300L Gage Brochure

Drawings:  300L End-Connect, 1/2 Inch NPT

300L End-Connect, 3/4 Inch NPT

IOM: Flat Glass Gage Installation, Operation and Maintenance Instruction Manual

Minimum Centers Guide: Resource book for determining minimum center-to-center dimension for gage and valve assemblies