top of page

Jerguson® LumaStar™ LED Illuminator

The Jerguson LumaStar LED Illuminator is the only white LED based illuminator, available in both aluminum and 316 stainless steel, that carries 3rd party certifications by world-wide agencies for use in hazardous locations.  The inherent benefits of LED’s are well known: long life, low power consumption, etc.  The use of focused, white LED’s directs an intense amount of light into the gage thus allowing the user to view an accurate level indication even under dirty conditions.

lumastar led glass gage illuminator
FM/CSA Power Supply

LumaStar™ Illuminator – Model EPL-100

Jerguson® LumaStar™ Illuminators’ white LED design combines long-life performance with superior visibility for hazardous locations. Jerguson’s Model EPL-100 is approved for use in Class I, Div 1, Group B, C & D and Zone 1 & 2 environments and available in sizes up to 58″ long with a single power supply. That means a four section size nine or five section size seven gage from a single power supply at less than 250 mA! Contact your local representative or a Jerguson Applications Engineer to configure an EPL-100 for your transparent glass level gages.

  • High Contrast

    • Superior Visibility Day or Night

  • Maintenance FREE

  • Long Life ~100,000 hrs.

  • No Heat Generation

  • Field Upgradable

    • Fits any glass gage!

  • Eliminates “bulb-changes”

  • Longest Field-of-View

  • Covers up to 4 Size 9 Gage Sections or 5 Size 7 Gage Sections

  • Explosion-Proof Power Supply, Intrinsically Safe Lighting Circuit

  • Pays for itself in electricity savings alone!

​

​

LumaStar™ Offshore Illuminator – Model EPL-316

All 316 Stainless Construction for Offshore & Other Severe Service Environments

Jerguson® is pleased to announce the addition of the 316 Stainless Steel LED Gage Glass LumaStar™ Illuminator to the world’s largest selection of level indication and control products. Jerguson’s Model EPL-316 is approved for use in Class I, Div 1, Group B, C & D and Zone 2 environments and available in sizes up to 58″ long with a single power supply. That means a four section size nine gage or five section size seven from a single power supply at less than 250 mA! Contact your local representative or a Jerguson Applications Engineer to configure an EPL-316 for your transparent glass level gages.

  • High Contrast

    • Superior Visibility Day or Night

  • Maintenance FREE

  • Long Life ~100,000 hrs.

  • No Heat Generation

  • Field Upgradable

    • Fits any glass gage!

  • Eliminates “bulb-changes”

  • Longest Field-of-View

  • Covers up to 4 Size 9 Gage Sections or 5 Size 7 Gage Sections

  • Explosion-Proof Power Supply, Intrinsically Safe Lighting Circuit

  • Pays for itself in electricity savings alone!

  • IP66 Rating

​

​

EPL100 lumastar led illuminator
EPL316 lumastar led illuminator
316 epl lumastar offshore illuminator

FM/CSA Power Supply

Barrier Driven 24VDC Power Supply Option

LumaStar™ Illuminator – Model EPL-100 & EPL-316

Jerguson® LumaStar™ Illuminators’ white LED design combines long-life performance with superior visibility for hazardous locations. Jerguson’s illuminators with 24VDC power supplies are approved for use in Class I, Div 1, Group A, B, C & D environments and available in sizes up to 58″ long with a single power supply. That means a four section size nine or five section size seven gage from a single power supply at less than 250 mA! Contact your local representative or a Jerguson Applications Engineer to configure an illuminator for your transparent glass level gages.

  • 24VDC Power Supply

  • Terminal Housing or Field-Wireable Connector Available

  • High Contrast

    • Superior Visibility Day or Night

  • Maintenance FREE

  • Long Life ~100,000 hrs.

  • No Heat Generation

  • Field Upgradable

    • Fits any glass gage!

  • Eliminates “bulb-changes”

  • Longest Field-of-View

  • Covers up to 4 Size 9 Gage Sections or 5 Size 7 Gage Sections

  • Pays for itself in electricity savings alone!

field terminal connections for lumastar led illuminator
bottom of page